.gitmodules

@@ -5,7 +5,7 @@
 [submodule "sources/bitbake"]
 	path = sources/bitbake
 	url = git://git.openembedded.org/bitbake
-	branch = 1.50.3
+	branch = 1.52
 [submodule "sources/meta-openembedded"]
 	path = sources/meta-openembedded
 	url = git://git.openembedded.org/meta-openembedded
@@ -14,7 +14,3 @@
 	path = sources/meta-raspberrypi
 	url = git://git.yoctoproject.org/meta-raspberrypi
 	branch = hardknott
-[submodule "sources/meta-rauc"]
-	path = sources/meta-rauc
-	url = https://github.com/rauc/meta-rauc.git
-	branch = hardknott

LICENSE

@@ -1,201 +0,0 @@
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
-   APPENDIX: How to apply the Apache License to your work.
-
-      To apply the Apache License to your work, attach the following
-      boilerplate notice, with the fields enclosed by brackets "[]"
-      replaced with your own identifying information. (Don't include
-      the brackets!)  The text should be enclosed in the appropriate
-      comment syntax for the file format. We also recommend that a
-      file or class name and description of purpose be included on the
-      same "printed page" as the copyright notice for easier
-      identification within third-party archives.
-
-   Copyright [yyyy] [name of copyright owner]
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.

README.md

@@ -1,34 +0,0 @@
-# TSGRain yocto os
-
-This is the yocto-based linux distribution that runs the TSGRain irrigation controller.
-
-## Build image
-
-```sh
-# Use docker build environment
-docker run -it --rm --user $(id -u):$(id -g) -v $(pwd):$(pwd) thetadev256/yoctobuild
-
-. ./oe-init-build-env
-bitbake tsgrain-image
-```
-
-## Provision package repository
-
-Build the package index and run a webserver in the package directory
-
-```sh
-bitbake package-index
-cd {BUILD_DIR}/tmp-glibc/deploy/ipk
-sudo python -m http.server 80
-```
-
-On the Pi, add the server to the opkg package sources
-```sh
-# Add to /etc/opkg/opkg.conf
-src/gz all http://{hostname}.local/all
-src/gz cortexa53 http://{hostname}.local/cortexa53
-src/gz raspberrypi3_64 http://{hostname}.local/raspberrypi3_64
-
-opkg update
-
-```

docker/Dockerfile

@@ -1,17 +0,0 @@
-FROM debian:10
-
-RUN apt-get update && apt-get install -y git nano tar locales \
-	gawk wget git-core diffstat unzip texinfo gcc-multilib \
-    build-essential chrpath socat cpio python python3 python3-pip python3-pexpect \
-    xz-utils debianutils iputils-ping libsdl1.2-dev xterm libmd0 && \
-    apt-get clean autoclean
-
-RUN echo "ybuildr:x:1000:1000:ybuildr:/home:/bin/bash" >> /etc/passwd && \
-    echo "root:root" | chpasswd && \
-    echo "ybuildr:1234" | chpasswd && \
-	sed -i '/en_US.UTF-8/s/^# //g' /etc/locale.gen && \
-	locale-gen
-
-ENV LANG en_US.UTF-8
-ENV LANGUAGE en_US:en
-ENV LC_ALL en_US.UTF-8

keys/.gitignore

@@ -1 +0,0 @@
-dev

keys/deploy_certs.sh

@@ -1,6 +0,0 @@
-#!/bin/bash
-set -e
-
-cd -- $( dirname -- "${BASH_SOURCE[0]}" )
-
-cp dev/ca.cert.pem ../sources/meta-tsgrain/recipes-core/rauc/files/ca.cert.pem

keys/gen_dev_certs.sh

@@ -1,31 +0,0 @@
-#!/bin/bash
-set -e
-cd -- $( dirname -- "${BASH_SOURCE[0]}" )
-
-ORG="Hochschule Augsburg"
-PROJ="TSGRain"
-
-BASE_DEV="$(pwd)/dev"
-export OPENSSL_CONF=$(pwd)/openssl.cnf
-
-if [ -e $BASE_DEV ]; then
-    echo "CA already exists, creating new certificate"
-    cd $BASE_DEV
-else
-    echo "Creating new CA"
-
-    mkdir -p $BASE_DEV/{private,certs}
-    touch $BASE_DEV/index.txt
-    echo 00 > $BASE_DEV/serial
-    cd $BASE_DEV
-
-    echo "Development CA"
-    openssl req -newkey rsa -keyout private/ca.key.pem -out ca.csr.pem -subj "/O=$ORG/CN=$PROJ Development CA"
-    openssl ca -batch -selfsign -extensions v3_ca -in ca.csr.pem -out ca.cert.pem -keyfile private/ca.key.pem
-fi
-
-SN=$(cat serial)
-
-echo "Development Signing Keys 1"
-openssl req -newkey rsa -keyout private/development-$SN.key.pem -out development-$SN.csr.pem -subj "/O=$ORG/CN=$PROJ Development-$SN"
-openssl ca -batch -extensions v3_leaf -in development-$SN.csr.pem -out development-$SN.cert.pem

keys/openssl.cnf

@@ -1,54 +0,0 @@
-[ ca ]
-default_ca      = CA_default            # The default ca section
-
-[ CA_default ]
-dir            = .                     # top dir
-database       = $dir/index.txt        # index file.
-new_certs_dir  = $dir/certs            # new certs dir
-serial         = $dir/serial           # serial no file
-RANDFILE       = $dir/private/.rand    # random number file
-
-private_key    = $dir/private/ca.key.pem# CA private key
-certificate    = $dir/ca.cert.pem       # The CA cert
-
-default_startdate = 19700101000000Z
-default_enddate = 99991231235959Z
-
-default_crl_days= 30                   # how long before next CRL
-
-default_md     = sha256                # md to use
-policy         = policy_any            # default policy
-email_in_dn    = no                    # Don't add the email into cert DN
-name_opt       = ca_default            # Subject name display option
-cert_opt       = ca_default            # Certificate display option
-copy_extensions = none                 # Don't copy extensions from request
-
-[ policy_any ]
-organizationName       = match
-commonName             = supplied
-
-[ req ]
-default_bits           = 2048
-distinguished_name     = req_distinguished_name
-x509_extensions        = v3_leaf
-encrypt_key = no
-default_md = sha256
-
-[ req_distinguished_name ]
-commonName                     = Common Name (eg, YOUR name)
-commonName_max                 = 64
-
-[ v3_ca ]
-subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid:always,issuer:always
-basicConstraints = CA:TRUE
-
-[ v3_inter ]
-subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid:always,issuer:always
-basicConstraints = CA:TRUE,pathlen:0
-
-[ v3_leaf ]
-subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid:always,issuer:always
-basicConstraints = CA:FALSE

sample-files/bblayers.conf.sample

@@ -10,10 +10,10 @@ BBFILES ?= ""
 
 BBLAYERS ?= " \
   ##OEROOT##/sources/meta-tsgrain \
-  ##OEROOT##/sources/meta-rauc \
   ##OEROOT##/sources/meta-raspberrypi \
   ##OEROOT##/sources/meta-openembedded/meta-initramfs \
   ##OEROOT##/sources/meta-openembedded/meta-oe \
+  ##OEROOT##/sources/meta-openembedded/meta-webserver \
   ##OEROOT##/sources/meta-openembedded/meta-networking \
   ##OEROOT##/sources/meta-openembedded/meta-python \
   ##OEROOT##/sources/meta-openembedded/meta-multimedia  \

sample-files/local.conf.sample

@@ -1,9 +1,9 @@
 DISTRO   = "tsgrain"
 
-MACHINE = "raspberrypi3-64"
+#MACHINE = "raspberrypi3"
 
 # This sets the default machine to be qemuarm if no other machine is selected:
-MACHINE ??= "qemuarm64"
+MACHINE ??= "qemuarm"
 
 # BUILDFILE_DIR = "/buildfiles"
 
@@ -14,6 +14,8 @@ TMPDIR = "${BUILDFILE_DIR}/tmp"
 
 USER_CLASSES = "buildstats buildstats-summary image-mklibs image-prelink"
 
+PACKAGE_CLASSES = "package_ipk"
+
 PATCHRESOLVE = "noop"
 
 # Don't generate the mirror tarball for SCM repos, the snapshot is enough

sources/meta-openembedded

@@ -1 +1 @@
-Subproject commit 672a7420b28129aecdbf077505058b90d23c0919
+Subproject commit d378e4293d18e374f5d1494a88bfc3caee4d02df

sources/meta-rauc

@@ -1 +0,0 @@
-Subproject commit 64b84017dd07be1d9da76943b59d77028bb5ccc7

sources/meta-tsgrain/classes/rauc-integration.bbclass

@@ -1 +0,0 @@
-OVERRIDES .= "${@bb.utils.contains('DISTRO_FEATURES', 'rauc', ':rauc-integration', '', d)}"

sources/meta-tsgrain/conf/distro/tsgrain.conf

@@ -11,7 +11,7 @@ LOCALCONF_VERSION = "1"
 SDK_NAME = "${DISTRO}-${TCLIBC}-${SDKMACHINE}-${IMAGE_BASENAME}-${TUNE_PKGARCH}-${MACHINE}"
 SDKPATHINSTALL = "/opt/${DISTRO}/${SDK_VERSION}"
 
-TSGRAIN_DEFAULT_DISTRO_FEATURES = "systemd largefile wifi bluez5 bluetooth rauc"
+TSGRAIN_DEFAULT_DISTRO_FEATURES = "systemd largefile wifi bluez5 bluetooth"
 
 DISTRO_FEATURES ?= "${DISTRO_FEATURES_DEFAULT} ${TSGRAIN_DEFAULT_DISTRO_FEATURES}"
 DISTRO_FEATURES_remove = "x11 sysvinit"
@@ -20,16 +20,5 @@ VIRTUAL-RUNTIME_init_manager = "systemd"
 VIRTUAL-RUNTIME_initscripts = ""
 VIRTUAL-RUNTIME_dev_manager = "systemd"
 
-PACKAGE_CLASSES = "package_ipk"
-
-# Raspberry Pi specific settings
-SDIMG_ROOTFS_TYPE = "ext4"
-RPI_USE_U_BOOT = "1"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-PREFERRED_PROVIDER_u-boot-fw-utils = "libubootenv"
-ENABLE_UART = "1"
-ENABLE_I2C = "1"
-KERNEL_MODULE_AUTOLOAD:rpi += "i2c-dev i2c-bcm2708"
-
 require conf/distro/include/yocto-uninative.inc
 INHERIT += "uninative buildstats sstate license remove-libtool"

sources/meta-tsgrain/recipes-bsp/rpi-u-boot-scr/files/boot.cmd.in

@@ -1,46 +0,0 @@
-fdt addr ${fdt_addr} && fdt get value bootargs /chosen bootargs
-
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-test -n "${BOOT_DEV}" || setenv BOOT_DEV "mmc 0:1"
-
-setenv bootpart
-setenv raucslot
-
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootpart}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Found valid RAUC slot A"
-      setenv bootpart "/dev/mmcblk0p2"
-      setenv raucslot "A"
-      setenv BOOT_DEV "mmc 0:2"
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Found valid RAUC slot B"
-      setenv bootpart "/dev/mmcblk0p3"
-      setenv raucslot "B"
-      setenv BOOT_DEV "mmc 0:3"
-    fi
-  fi
-done
-
-if test -n "${bootpart}"; then
-  setenv bootargs "${bootargs} root=${bootpart} rauc.slot=${raucslot}"
-  saveenv
-else
-  echo "No valid RAUC slot found. Resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  saveenv
-  reset
-fi
-
-fatload mmc 0:1 ${kernel_addr_r} @@KERNEL_IMAGETYPE@@
-if test ! -e mmc 0:1 uboot.env; then saveenv; fi;
-@@KERNEL_BOOTCMD@@ ${kernel_addr_r} - ${fdt_addr}

sources/meta-tsgrain/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bbappend

@@ -1,4 +0,0 @@
-inherit rauc-integration
-
-FILESEXTRAPATHS:prepend:rauc-integration := "${THISDIR}/files:"
-SRC_URI:append:rauc-integration = " file://boot.cmd.in"

sources/meta-tsgrain/recipes-connectivity/dnsmasq/dnsmasq_%.bbappend

@@ -1 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"

sources/meta-tsgrain/recipes-connectivity/hostapd/files/hostapd.service

@@ -1,11 +0,0 @@
-[Unit]
-Description=Hostapd IEEE 802.11 AP, IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
-After=network.target
-
-[Service]
-Type=forking
-PIDFile=/run/hostapd.pid
-ExecStart=@SBINDIR@/hostapd /app/hostapd/hostapd.conf -P /run/hostapd.pid -B
-
-[Install]
-WantedBy=multi-user.target

sources/meta-tsgrain/recipes-connectivity/hostapd/hostapd_%.bbappend

@@ -1,23 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
-
-SRC_URI_append = "\
-    file://hostapd.conf \
-"
-
-FILES_${PN} += "/app/hostapd/hostapd.conf"
-
-SYSTEMD_AUTO_ENABLE_${PN} = "enable"
-
-do_install_append() {
-    # Remove original config file
-    rm -rf ${D}${sysconfdir}
-
-    # Install config file to appfs
-    install -D -m 644 ${WORKDIR}/hostapd.conf ${D}/app/hostapd/hostapd.conf
-
-    # Change config file path
-    install -m 0644 ${WORKDIR}/hostapd.service ${D}${systemd_unitdir}/system/
-    sed -i -e 's,@SBINDIR@,${sbindir},g' -e 's,@SYSCONFDIR@,/app/hostapd,g' ${D}${systemd_unitdir}/system/hostapd.service
-}
-
-CONFFILES_${PN} = "/app/hostapd/hostapd.conf"

sources/meta-tsgrain/recipes-connectivity/openssh/files/sshd_config

@@ -1,118 +0,0 @@
-#	$OpenBSD: sshd_config,v 1.102 2018/02/16 02:32:40 djm Exp $
-
-# This is the sshd server system-wide configuration file.  See
-# sshd_config(5) for more information.
-
-# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
-
-# The strategy used for options in the default sshd_config shipped with
-# OpenSSH is to specify options with their default value where
-# possible, but leave them commented.  Uncommented options override the
-# default value.
-
-#Port 22
-#AddressFamily any
-#ListenAddress 0.0.0.0
-#ListenAddress ::
-
-HostKey /app/ssh/ssh_host_rsa_key
-HostKey /app/ssh/ssh_host_ecdsa_key
-HostKey /app/ssh/ssh_host_ed25519_key
-
-# Ciphers and keying
-#RekeyLimit default none
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2m
-#PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-#PubkeyAuthentication yes
-
-# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
-# but this is overridden so installations will only check .ssh/authorized_keys
-AuthorizedKeysFile	.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-#PasswordAuthentication yes
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-#UsePAM no
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-#X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-#PrintMotd yes
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-Compression no
-ClientAliveInterval 15
-ClientAliveCountMax 4
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# override default of no subsystems
-Subsystem	sftp	/usr/libexec/sftp-server
-
-# Example of overriding settings on a per-user basis
-#Match User anoncvs
-#	X11Forwarding no
-#	AllowTcpForwarding no
-#	PermitTTY no
-#	ForceCommand cvs server

sources/meta-tsgrain/recipes-core/base-files/base-files_%.bbappend

@@ -1 +0,0 @@
-FILESEXTRAPATHS:prepend:rpi := "${THISDIR}/files:"

sources/meta-tsgrain/recipes-core/base-files/files/fstab

@@ -1,10 +0,0 @@
-# stock fstab - you probably want to override this with a machine specific one
-
-/dev/root            /                    auto       defaults              1  1
-proc                 /proc                proc       defaults              0  0
-devpts               /dev/pts             devpts     mode=0620,ptmxmode=0666,gid=5      0  0
-tmpfs                /run                 tmpfs      mode=0755,nodev,nosuid,strictatime 0  0
-tmpfs                /var/volatile        tmpfs      defaults              0  0
-
-/dev/mmcblk0p1  /boot   vfat    defaults        0       0
-/dev/mmcblk0p4  /app    ext4    defaults        0       0

sources/meta-tsgrain/recipes-core/bundles/tsgrain-update.bb

@@ -1,14 +0,0 @@
-DESCRIPTION = "TSGRain RAUC bundle generator"
-
-inherit bundle
-
-RAUC_BUNDLE_COMPATIBLE = "TSGRain"
-RAUC_BUNDLE_VERSION = "v0.0.1"
-RAUC_BUNDLE_DESCRIPTION = "TSGRain update bundle"
-RAUC_BUNDLE_SLOTS = "rootfs"
-RAUC_SLOT_rootfs = "tsgrain-image"
-RAUC_SLOT_rootfs[fstype] = "ext4"
-
-RAUC_CERT_FILE = "${THISDIR}/../../../../keys/dev/development-01.cert.pem"
-RAUC_KEY_FILE = "${THISDIR}/../../../../keys/dev/private/development-01.key.pem"
-RAUC_KEYRING_FILE = "${THISDIR}/../../../../keys/dev/ca.cert.pem"

sources/meta-tsgrain/recipes-core/dnsmasq/dnsmasq_%.bbappend

@@ -1,9 +1,9 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
 
 SRC_URI_append = "\
-    file://sshd_config \
+    file://dnsmasq.conf \
 "
 
 do_install_append() {
-    install -m 644 ${WORKDIR}/sshd_config ${D}${sysconfdir}/ssh
+    install -m 644 ${WORKDIR}/dnsmasq.conf ${D}${sysconfdir}
 }

sources/meta-tsgrain/recipes-core/hostapd/hostapd_%.bbappend

@@ -0,0 +1,11 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+SRC_URI_append = "\
+    file://hostapd.conf \
+"
+
+SYSTEMD_AUTO_ENABLE_${PN} = "enable"
+
+do_install_append() {
+    install -m 644 ${WORKDIR}/hostapd.conf ${D}${sysconfdir}
+}

sources/meta-tsgrain/recipes-core/images/tsgrain-image.bb

@@ -7,7 +7,6 @@ IMAGE_INSTALL = "\
     \
     curl \
     python3 \
-    i2c-tools \
 "
 
 IMAGE_FEATURES = "\
@@ -17,9 +16,7 @@ IMAGE_FEATURES = "\
 "
 
 IMAGE_LINGUAS = ""
+IMAGE_FSTYPES = "tar.bz2 ext3 ${@bb.utils.contains_any("MACHINE", "raspberrypi3", "rpi-sdimg", "", d)}"
 
-IMAGE_FSTYPES="tar.bz2 ext4 wic.bz2"
+LICENSE = "MIT"
-WKS_FILE = "sdimage-tsgrain.wks"
-
-LICENSE = "Apache-2.0"
 inherit core-image

sources/meta-tsgrain/recipes-core/packagegroups/packagegroup-essential.bb

@@ -14,5 +14,4 @@ RRECOMMENDS_${PN} = "\
     cpufrequtils \
     htop \
     bash-completion \
-    nano \
 "

sources/meta-tsgrain/recipes-core/rauc/files/ca.cert.pem

@@ -1,81 +0,0 @@
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 0 (0x0)
-        Signature Algorithm: sha256WithRSAEncryption
-        Issuer: O=Hochschule Augsburg, CN=TSGRain Development CA
-        Validity
-            Not Before: Jan  1 00:00:00 1970 GMT
-            Not After : Dec 31 23:59:59 9999 GMT
-        Subject: O=Hochschule Augsburg, CN=TSGRain Development CA
-        Subject Public Key Info:
-            Public Key Algorithm: rsaEncryption
-                RSA Public-Key: (2048 bit)
-                Modulus:
-                    00:af:04:cb:e9:c5:9a:07:90:57:60:70:29:ac:de:
-                    ce:02:d1:63:11:8c:13:b1:92:31:d1:90:41:fb:2e:
-                    29:43:1e:76:ea:1e:a1:d1:f5:50:c9:bc:fb:42:a9:
-                    97:2c:f2:5c:05:2e:27:d1:bc:5d:c7:0f:fd:91:61:
-                    2d:1c:6d:80:58:e3:0b:a7:66:57:d2:2b:48:4d:d6:
-                    8b:f5:2b:ed:38:0d:54:b4:e5:4c:72:3f:6d:4e:c6:
-                    f2:eb:93:13:9b:34:b7:da:47:34:06:72:a6:42:61:
-                    94:aa:2e:13:f9:bd:6b:01:70:07:4c:01:7d:0e:0c:
-                    c9:b1:8a:04:67:af:1b:d5:dd:72:d3:05:8a:d5:12:
-                    0a:d7:d3:e8:d7:db:27:ac:3c:59:8d:8d:0d:6a:bd:
-                    b0:55:73:ea:ba:59:c7:82:d6:1d:26:56:d3:20:c7:
-                    7c:e2:2e:77:93:db:5e:05:dc:ef:03:da:69:db:86:
-                    71:38:ce:c0:f5:91:98:ec:d1:30:3f:5b:6a:f6:62:
-                    29:9f:31:16:67:b1:d1:08:8c:05:db:6f:fd:99:c7:
-                    0b:e0:b6:8e:04:ef:59:51:33:ee:f0:85:86:a4:8e:
-                    fd:70:70:01:91:49:f0:fb:9c:44:99:6b:8b:2b:70:
-                    e5:7f:0b:ae:55:7f:8c:e9:ea:42:30:73:1a:2c:c5:
-                    15:b9
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            X509v3 Subject Key Identifier: 
-                46:50:B7:B3:B3:07:F5:B0:4C:A0:A1:21:38:D3:02:70:8B:75:52:A9
-            X509v3 Authority Key Identifier: 
-                keyid:46:50:B7:B3:B3:07:F5:B0:4C:A0:A1:21:38:D3:02:70:8B:75:52:A9
-                DirName:/O=Hochschule Augsburg/CN=TSGRain Development CA
-                serial:00
-
-            X509v3 Basic Constraints: 
-                CA:TRUE
-    Signature Algorithm: sha256WithRSAEncryption
-         a3:b0:58:c2:c6:13:6d:b5:45:b8:fd:31:21:cb:4f:e0:51:e4:
-         8c:24:c9:bf:c6:f2:73:2e:1c:62:f0:71:dd:88:b2:eb:90:33:
-         12:33:ee:17:f3:3b:28:73:98:34:d9:85:d1:4f:25:a7:e7:51:
-         97:f1:48:b4:48:9e:7c:35:bf:dc:af:5b:8c:93:57:b1:f4:f9:
-         dc:6e:64:cd:83:97:96:51:c4:a3:10:cd:9d:cc:14:ef:dd:8d:
-         89:9e:6c:77:f9:06:26:84:13:e0:58:7b:49:32:48:0b:14:62:
-         c6:5e:6a:55:8d:85:16:ff:98:48:c4:10:03:c4:21:a3:ad:bd:
-         8d:ad:68:d4:1d:49:34:ee:13:07:fd:81:b2:22:67:48:a6:d9:
-         31:ed:e2:be:c8:2d:5e:3f:e4:58:95:b0:53:3e:42:91:f4:39:
-         3e:1c:15:5e:f8:a5:b0:d4:60:ac:ba:70:49:0c:95:96:52:1a:
-         41:6f:60:7c:d4:81:94:d1:db:66:73:07:0e:ed:6b:fa:34:13:
-         1b:24:bd:85:f4:4f:e0:dc:1d:dd:f1:d6:8c:f8:a5:f9:2d:23:
-         6a:7e:af:ca:66:b8:26:d0:dd:44:87:82:83:fa:5e:f6:41:0d:
-         2b:4b:83:34:19:a7:78:d6:9d:39:5f:36:cb:83:7e:2d:3b:86:
-         22:57:dc:c3
------BEGIN CERTIFICATE-----
-MIIDlTCCAn2gAwIBAgIBADANBgkqhkiG9w0BAQsFADA/MRwwGgYDVQQKDBNIb2No
-c2NodWxlIEF1Z3NidXJnMR8wHQYDVQQDDBZUU0dSYWluIERldmVsb3BtZW50IENB
-MCAXDTcwMDEwMTAwMDAwMFoYDzk5OTkxMjMxMjM1OTU5WjA/MRwwGgYDVQQKDBNI
-b2Noc2NodWxlIEF1Z3NidXJnMR8wHQYDVQQDDBZUU0dSYWluIERldmVsb3BtZW50
-IENBMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEArwTL6cWaB5BXYHAp
-rN7OAtFjEYwTsZIx0ZBB+y4pQx526h6h0fVQybz7QqmXLPJcBS4n0bxdxw/9kWEt
-HG2AWOMLp2ZX0itITdaL9SvtOA1UtOVMcj9tTsby65MTmzS32kc0BnKmQmGUqi4T
-+b1rAXAHTAF9DgzJsYoEZ68b1d1y0wWK1RIK19Po19snrDxZjY0Nar2wVXPqulnH
-gtYdJlbTIMd84i53k9teBdzvA9pp24ZxOM7A9ZGY7NEwP1tq9mIpnzEWZ7HRCIwF
-22/9mccL4LaOBO9ZUTPu8IWGpI79cHABkUnw+5xEmWuLK3DlfwuuVX+M6epCMHMa
-LMUVuQIDAQABo4GZMIGWMB0GA1UdDgQWBBRGULezswf1sEygoSE40wJwi3VSqTBn
-BgNVHSMEYDBegBRGULezswf1sEygoSE40wJwi3VSqaFDpEEwPzEcMBoGA1UECgwT
-SG9jaHNjaHVsZSBBdWdzYnVyZzEfMB0GA1UEAwwWVFNHUmFpbiBEZXZlbG9wbWVu
-dCBDQYIBADAMBgNVHRMEBTADAQH/MA0GCSqGSIb3DQEBCwUAA4IBAQCjsFjCxhNt
-tUW4/TEhy0/gUeSMJMm/xvJzLhxi8HHdiLLrkDMSM+4X8zsoc5g02YXRTyWn51GX
-8Ui0SJ58Nb/cr1uMk1ex9PncbmTNg5eWUcSjEM2dzBTv3Y2Jnmx3+QYmhBPgWHtJ
-MkgLFGLGXmpVjYUW/5hIxBADxCGjrb2NrWjUHUk07hMH/YGyImdIptkx7eK+yC1e
-P+RYlbBTPkKR9Dk+HBVe+KWw1GCsunBJDJWWUhpBb2B81IGU0dtmcwcO7Wv6NBMb
-JL2F9E/g3B3d8daM+KX5LSNqfq/KZrgm0N1Eh4KD+l72QQ0rS4M0Gad41p05XzbL
-g34tO4YiV9zD
------END CERTIFICATE-----

sources/meta-tsgrain/recipes-core/rauc/files/rauc-grow-data-partition.service

@@ -1,12 +0,0 @@
-[Unit]
-Description=Service to grow data partition size
-DefaultDependencies=no
-Before=home.mount
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-ExecStart=/usr/sbin/parted --script /dev/mmcblk0 resizepart 4 100%
-
-[Install]
-WantedBy=home.mount

sources/meta-tsgrain/recipes-core/rauc/files/system.conf

@@ -1,16 +0,0 @@
-[system]
-compatible=TSGRain
-bootloader=uboot
-
-[keyring]
-path=/etc/rauc/ca.cert.pem
-
-[slot.rootfs.0]
-device=/dev/mmcblk0p2
-type=ext4
-bootname=A
-
-[slot.rootfs.1]
-device=/dev/mmcblk0p3
-type=ext4
-bootname=B

sources/meta-tsgrain/recipes-core/rauc/rauc_%.bbappend

@@ -1,23 +0,0 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/files:"
-SRC_URI:append := "  \
-	file://system.conf \
-	file://ca.cert.pem \
-	file://rauc-grow-data-partition.service \
-"
-
-# additional dependencies required to run RAUC on the target
-RDEPENDS:${PN} += "u-boot-fw-utils u-boot-env"
-
-inherit systemd
-
-SYSTEMD_PACKAGES += "${PN}-grow-data-part"
-SYSTEMD_SERVICE:${PN}-grow-data-part = "rauc-grow-data-partition.service"
-
-PACKAGES += "rauc-grow-data-part"
-
-RDEPENDS:${PN}-grow-data-part += "parted"
-
-do_install:append() {
-	install -d ${D}${systemd_unitdir}/system/
-	install -m 0644 ${WORKDIR}/rauc-grow-data-partition.service ${D}${systemd_unitdir}/system/
-}

sources/meta-tsgrain/recipes-core/udev/files/raspberrypi-rauc.rules

@@ -1,4 +0,0 @@
-/dev/mmcblk0p1
-/dev/mmcblk0p2
-/dev/mmcblk0p3
-/dev/mmcblk0p4

sources/meta-tsgrain/recipes-core/udev/udev-extraconf_%.bbappend

@@ -1,6 +0,0 @@
-FILESEXTRAPATHS:prepend:rpi := "${THISDIR}/files:"
-SRC_URI:append:rpi = " file://raspberrypi-rauc.rules"
-
-do_install:append:rpi() {
-    install -m 0644 ${WORKDIR}/raspberrypi-rauc.rules ${D}${sysconfdir}/udev/mount.blacklist.d/
-}

sources/meta-tsgrain/recipes-dev/opkg/files/opkg.conf

@@ -1,34 +0,0 @@
-# Must have one or more source entries of the form:
-#
-#   src <src-name> <source-url>
-#
-# and one or more destination entries of the form:
-#
-#   dest <dest-name> <target-path>
-#
-# where <src-name> and <dest-names> are identifiers that
-# should match [a-zA-Z0-9._-]+, <source-url> should be a
-# URL that points to a directory containing a Familiar
-# Packages file, and <target-path> should be a directory
-# that exists on the target system.
-
-# Proxy Support
-#option http_proxy http://proxy.tld:3128
-#option ftp_proxy http://proxy.tld:3128
-#option proxy_username <username>
-#option proxy_password <password>
-
-# Enable GPGME signature
-# option check_signature 1
-
-# Offline mode (for use in constructing flash images offline)
-#option offline_root target
-
-# Default destination for installed packages
-dest root /
-
-src/gz all http://thetabook.local/all
-src/gz cortexa7t2hf-neon-vfpv4 http://thetabook.local/cortexa7t2hf-neon-vfpv4
-src/gz raspberrypi3 http://thetabook.local/raspberrypi3
-#src/gz cortexa53 http://thetabook.local/cortexa53
-#src/gz raspberrypi3_64 http://thetabook.local/raspberrypi3_64

sources/meta-tsgrain/recipes-dev/opkg/opkg_%.bbappend

@@ -1 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"

sources/meta-tsgrain/recipes-kernel/linux/files/rauc.cfg

@@ -1,6 +0,0 @@
-CONFIG_SQUASHFS=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SQUASHFS_FILE_CACHE=y
-CONFIG_SQUASHFS_DECOMP_SINGLE=y
-CONFIG_SQUASHFS_ZLIB=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3

sources/meta-tsgrain/recipes-kernel/linux/linux-raspberrypi%.bbappend

@@ -1,6 +0,0 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/files:"
-
-inherit rauc-integration
-
-SRC_URI:append:rauc-integration = " file://rauc.cfg"
-CMDLINE:remove:rauc-integration = "root=/dev/mmcblk0p2"

sources/meta-tsgrain/wic/sdimage-tsgrain.wks

@@ -1,4 +0,0 @@
-part /boot --source bootimg-partition --ondisk mmcblk0 --fstype=vfat --label boot --active --align 4096 --size 100
-part / --source rootfs --ondisk mmcblk0 --fstype=ext4 --label rootfs_A --align 4096
-part / --source rootfs --ondisk mmcblk0 --fstype=ext4 --label rootfs_B --align 4096
-part /app --source rootfs --rootfs-dir=${IMAGE_ROOTFS}/app --ondisk mmcblk0 --fstype=ext4 --label appfs --align 1024 --size 500 --fsoptions "x-systemd.growfs"